Skip to content
Serving the Phoenix metro and Maricopa County

Repiping

Whole-house repiping

A repipe replaces every water supply line in the house, usually with PEX run through the attic and walls instead of through the slab. It's the permanent fix for polybutylene, failing galvanized pipe, and copper with repeated pinhole or slab leaks.

  • Same-day service when a plumber is available
  • Serving the Phoenix metro
  • Quote before work
Row of copper pipe fittings

A repipe sounds like a huge project, but most single-family Valley homes are repiped in a few days while the family stays in the house. Water is off during working hours and restored most evenings.

In slab homes, the new lines run overhead: through the attic, with drops down interior walls to each fixture. Old lines in the slab are capped and abandoned, which also ends the risk of future slab leaks on those lines.

Repiping at a glance

Typical length
A few working days for a single-family home
Material
PEX, run overhead instead of in the slab
Permit
Usually required

Signs you need repiping

  • Gray polybutylene pipe at the water heater or under sinks
  • Two or more slab or pinhole leaks
  • Rusty or low-pressure water from galvanized pipe
  • A home inspection or insurer flagging the pipe material

How the plumber handles it

  1. 1

    Walkthrough and plan

    The plumber maps fixtures and plans attic routes, drops and a manifold or trunk-and-branch layout.

  2. 2

    Permit

    Repipes usually need a permit from the city or, in unincorporated areas, Maricopa County.

  3. 3

    Install

    New PEX lines are run and connected fixture by fixture, and the old lines are capped.

  4. 4

    Test and patch

    The system is pressure-tested and inspected. Access holes are patched to the agreed level.

What affects the cost

Prices depend on what the plumber finds, so the plumber quotes on site. These are the main factors:

  • Number of bathrooms and fixtures
  • Single story vs. two story
  • Attic access and clearances
  • Drywall patching and texture matching
  • Permit and inspection fees

Frequently asked questions

PEX or copper for a Phoenix repipe?

PEX is the most common choice today: it resists scale better than older copper, has fewer joints, and handles attic routing well. Copper is still an option.

Can we live in the house during a repipe?

Usually. Water is off during working hours and restored at night on most days.

Repiping across the Valley

Need repiping in the Valley?

Same-day service when a plumber is available. One call connects you with a licensed plumber who serves your ZIP.

Call nowRequest service