Plumbing services
Hard Water & Filtration
Hard water carries dissolved calcium and magnesium that leave scale in water heaters, tankless units, fixtures and appliances. Treatment ranges from a whole-house softener to a reverse osmosis system for drinking water.
- Same-day service when a plumber is available
- 3 services
Signs you need hard water & filtration help
- White crust on faucets and glass
- A water heater that rumbles or pops
- Short-lived faucet cartridges and fill valves
- Chlorine or mineral taste in tap water
Hard Water & Filtration services
Water Softener Installation
A water softener removes the calcium and magnesium that make water hard, which protects water heaters, fixtures and appliances from scale. A plumber sizes the unit to your household's water use and measured hardness, connects it at the softener loop or main line, and routes the drain correctly.
Reverse Osmosis Systems
A reverse osmosis (RO) system pushes water through a fine membrane to cut dissolved minerals and many other contaminants in drinking water. A plumber mounts it under the kitchen sink, adds a dedicated faucet, connects the drain with an air gap, and can run a line to the fridge or ice maker.
Whole-House Filtration
A whole-house filter treats all the water entering the home, usually with sediment and carbon stages that reduce chlorine, taste and odor at every tap and shower. It doesn't soften water. For scale, it's paired with a softener.
Guides
Hard Water & Filtration near you
Hard Water & Filtration FAQ
Do I need a softener or a filter?
A softener removes hardness minerals that cause scale. A carbon filter improves taste and chlorine. Reverse osmosis purifies drinking water at one tap. Many homes in hard-water areas use a softener plus RO.
How do I find out how hard my water is?
Your water provider's annual water quality report (the Consumer Confidence Report) lists hardness, often in grains per gallon or mg/L. Above about 7 grains per gallon (120 mg/L) is generally considered hard. On a well, a plumber or lab can test it.
How often do RO filters need changing?
Pre-filters usually every 6 to 12 months and the membrane every few years, depending on water use and whether the water is softened first.
Is a whole-house filter the same as a softener?
No. A filter reduces chlorine, taste and sediment. A softener removes hardness minerals. Many homes in hard-water areas use both, with the filter first.
Other plumbing services
Need hard water & filtration help?
Same-day service when a plumber is available. One call connects you with a licensed plumber who serves your ZIP.